Cooling System

BLACK/BLACK PAINT (S1)
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Nut to secure fan to water pump shaft
Mid 1930 thru 1931
3-3
1997
Radiator mounting to frame springs
1928-1931
3-3
1997
BLACK ENAMEL
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Radiator fan shroud
1928 thru February 1929
3-2
1997
SATIN BLACK
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Radiators
1928-1931
3-2
1997
BRASS
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Water pump rear lubricator fitting and cap
1928-1931
3-2
1997
Water pump packing nut (also bronze)
1928-1929
3-2
1997
Radiator drain cock (petcock)
1928-1931
3-3
1997
“T” handle on “T” shaped petcock (also unfinished steel)
Late 1931
3-3
1997
BRASS CLAD ASBESTOS
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Water inlet and outlet castings (also copper clad asbestos)
1928-1931
3-2
1997
BRONZE
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Water pump packing nut (also brass)
1928-1929
3-2
1997
CADMIUM PLATE (S7)
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Water pump front lubricator fitting (also unfinished)
1928-1931
3-2
1997
Radiator inlet and outlet hose clamp assembly including screws and nuts (also zinc plated)
1928-1931
3-3
1997
COPPER CLAD ASBESTOS
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Water inlet and outlet castings (also brass clad asbestos)
1928-1931
3-2
1997
FORD ENGINE GREEN
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Water inlet and outlet castings
1928-1931
3-2
1997
Water pump casting
1928-1931
3-2
1997
The water pump had a white compressed asbestos or black rubberized asbestos gasket.
RAVEN FINISH/BLACK OXIDE (S2)
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Water inlet casting domed bolts
Mid 1930-1931
3-2
1997
Cotter for securing radiator mounting castle nuts to bolts
1928 until mid 1929
3-3
1997
UNFINISHED/PLAIN/UNPAINTED
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Water inlet casting domed bolts and lock washers
1928 thru early 1930
3-2
1997
Water pump front lubricator fitting (also cadmium)
1928-1931
3-2
1997
Water pump nuts and lock washers
1928-mid 1930
3-2
1997
Nut to secure fan to water pump shaft
1928 until mid 1930
3-3
1997
“T” handle on “T” shaped petcock (also brass)
Late 1931
3-3
1997
Radiator mounting to frame bolts, castle nuts, cotter (slight problem here in the standards)
1928-1931
3-3
1997
Cotter for securing radiator mounting castle nuts to bolts
Mid 1929 thru 1931
3-3
1997
ZINC DIE CAST
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Water pump packing nut
1930-1931
3-2
1997
ZINC PLATE (S8)
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Water pump nuts
Late 1930 thru 1931
3-2
1997
Radiator inlet and outlet hose clamp assembly including screws and nuts (also cadmium)
1928-1931
3-3
1997
OTHER
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Inside of the (brass) cylinder cover of the (brass) rear lubricator fitting on the water pump was a (tan paper seal)
1928-1931
3-2
1997
Original fan belt (black or reddish brown)
1928-1931
3-3
1997
Radiator hoses (black with red longitudinal stripe or all red)
1928-1931
3-3
1997
Black fabric reinforced rubber or oak tanned leather pad between frame and bottom of radiator
1928-1931
3-3
1997
Steel shims were used between the radiator and frame with the introduction of the new style front cross member on remaining passenger and light commercial vehicles using the 1929 style radiator
October 1929 thru 1929 ?
3-3
1997