Undercarriage

ALUMINUM
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Speedometer drive cap assembly (optional finish) (could also be Black)
1928-1931
4-11
1997
BLACK/BLACK PAINT (S1)
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Front radius rod
1928-1931
4-2
1997
Front radius rod ball cap springs
1928-1931
4-2
1997
Front spring hangers
1928-1931
4-2
1997
Front spring hanger bar
1928-1931
4-2
1997
Front spring perch
1928-1931
4-2
1997
Front spring assembly
1928-1931
4-2
1997
Frame assembly (no parts were rubbed out)
1928-1931
4-4
1997
Flywheel housing cover plate
1928-1931
4-6
1997
Front axle
1928-1931
4-11
1997
Rear axle
1928-1931
4-11
1997
Battery support (forged and stamped design)
1928-1931
4-11
1997
Battery support (stamped design) bolt
Mid 1930 thru 1931
4-11
1997
Battery clamps and cover
1928-1931
4-11
1997
Body mounting bolts
1928-1931
4-11
1997
Bumper arm, front
1928-1931
4-11
1997
Bumper arm, studs
1928-1931
4-11
1997
Bumper arm, rear
1928-1931
4-11
1997
Bumper arm rear bolts (to frame), nuts
Mid 1930-1931
4-11
1997
Clutch housing hand hole cover
1928-1931
4-11
1997
Cross brace rear bumper arm
1928-1931
4-11
1997
Cross brace rear bumper arm bolts and nuts
Mid 1930 thru 1931
4-11
1997
Cross brace rear bumper arm lock washers
Early 1931 thru 1931
4-11
1997
Drag link
1928-1931
4-11
1997
Drag link grease retainer caps
1928-1931
4-11
1997
Fender brackets, front
1928-1931
4-11
1997
Fender bracket front bolts
Mid 1930 thru 1931
4-11
1997
Fender brackets, rear
1928-1931
4-11
1997
Fender bracket rear bolts
Mid 1930 thru 1931
4-11
1997
Flywheel housing shield
1928-1931
4-11
1997
Frame assembly
1928-1931
4-11
1997
Radius rod, front
1928-1931
4-11
1997
Radius rod, front springs
1928-1931
4-11
1997
Radius rod, rear
1928-1931
4-11
1997
Speedometer drive cap assembly
1928-1931
4-11
1997
Spindles
1928-1931
4-11
1997
Spindle arms
1928-1931
4-11
1997
Spindle bolts (king pins)
1928-1931
4-11
1997
Spindle connecting rod
1928-1931
4-11
1997
Spindle connecting rod ends
1928-1931
4-11
1997
Spindle connecting rod end grease retainer caps
1928-1931
4-11
1997
Springs, front and rear
1928-1931
4-11
1997
Spring clips, front (“U” bolts)
1928-1931
4-11
1997
Spring clip bar, front
1928-1931
4-11
1997
Spring clips, front (“U” bolts) nuts
Mid 1930 thru 1931
4-11
1997
Spring clips, rear (“U” bolts)
1928-1931
4-11
1997
Spring clip bar, rear
1928-1931
4-11
1997
Spring perch
1928-1931
4-11
1997
Steering to frame nuts
Mid 1930 thru 1931
4-11
1997
Steering gear pitman arm
1928-1931
4-11
1997
Steering gear pitman arm nuts
Mid 1930 thru 1931
4-11
1997
Universal joint housing cap, outer
1928-1931
4-11
1997
BLACK ENAMEL
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Speedometer gear caps
1928-1931
4-7
1997
BODY COLOR
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Underside of body of metal sub frame models
1928-1931
4-9
1997
Front two body blocks
1928-1929
4-10
1997
BRASS
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Water pump type lubricator fitting
1928-1931
4-8
1997
DULL BLACK WOOD PRESERVITIVE
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
All wood sub frames and body blocks (except the front two body blocks on 1928-1929 models)
1928-1931
4-9
1997
CADMIUM PLATE (S7)
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Front spring hanger grease fittings
1928-1931
4-2
1997
Battery clamp hold down nuts
1931
4-5
1997
Drive type lubricator fittings (A)
Mid 1930-1931
4-8
1997
Drive type, 25 degree angle lubricator fitting (D)
Mid 1930-1931
4-8
1997
Body mounting lock washers
1928-1931
4-11
1997
Fender brackets, front bolts (changed to Black thru production)
1928 thru mid 1930
4-11
1997
Fender brackets, rear bolts (changed to Black thru production)
1928 thru mid 1930
4-11
1997
Grease fittings, drive types
Mid 1930 thru 1931
4-11
1997
Grease fittings, threaded (in the interest of preservation)
1928-1931
4-11
1997
FORD ENGINE GREEN
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Clutch housing
1928-1931
4-2
1997
Flywheel housing
1928-1931
4-6
1997
Clutch (bell) housing
1928-1931
4-6
1997
Clutch release arm
1928-1931
4-6
1997
Clutch housing
1928-1931
4-11
1997
Clutch release arm
1928-1931
4-11
1997
Flywheel housing
1928-1931
4-11
1997
Transmission case
1928-1931
4-11
1997
Transmission gear shift housing
1928-1931
4-11
1997
Universal joint housing, front
1928-1931
4-11
1997
RAVEN FINISH/BLACK OXIDE (S2)
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Rear axle differential housing filler and drain plug (also unfinished)
1928-1931
4-6
1997
Transmission case filler or drain plug (F) (also plain finish)
1928-1931
4-8
1997
Rear axle differential housing filler or drain plug (G) (also plain finish)
1928-1931
4-8
1997
Battery support (forged design) bolts, nuts lock washers
Thru Aug. 1928
4-11
1997
Battery support (stamped design) bolt (changed to Black thru production)
1928 to mid 1930
4-11
1997
Battery support (stamped design) nut and lock washer
1928-1931
4-11
1997
Body mounting nuts and flat washers
1928-1931
4-11
1997
Bumper arm, rear (bolts to body) nuts
1928-1931
4-11
1997
Bumper arm, rear (bolts to body) lock washers (changed to Unfinished thru production)
1928 to mid 1930
4-11
1997
Fender bracket rear nuts and lock washers
1928-1931
4-11
1997
Speedometer drive cap assembly bolts
1928-1931
4-11
1997
Transmission case drain and fill plugs
1928-1931
4-11
1997
UNFINISHED/PLAIN/UNPAINTED
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Front radius rod ball cap bolt
1928-1931
4-2
1997
Front radius rod ball cap socket
1928-1931
4-2
1997
Front radius rod ball cap
1928-1931
4-2
1997
Front radius rod ball cap sleeves
1928-1931
4-2
1997
Front radius rod ball cap nuts
1928-1931
4-2
1997
Front radius rod ball cap cotters
1928-1931
4-2
1997
Front radius rod ball cap retaining pin
1928-1931
4-2
1997
Front radius rod ball cap retaining pin cotter
1928-1931
4-2
1997
Front spring hanger bar castle nuts
1928-1931
4-2
1997
Front spring hanger bar cotters
1928-1931
4-2
1997
Rear axle differential housing filler and drain plug (also raven)
1928-1931
4-6
1997
Speedometer gear caps
1928-1931
4-7
1997
Drive type lubricator fittings (A)
1928 to mid 1930
4-8
1997
Threaded (check valve type) lubricator fittings (B)
1928-1931
4-8
1997
Drive type, 25 degree angle lubricator fitting (D)
1928 until mid 1930
4-8
1997
Threaded 67-1/2 degree angle lubricator fitting (check valve type) (E)
1928-1931
4-8
1997
Transmission case filler or drain plug (F) (also raven finish)
1928-1931
4-8
1997
Rear axle differential housing filler or drain plug (G) (also raven finish)
1928-1931
4-8
1997
Battery support (stamped design) nut (rear) (changed to Zinc thru production)
1928 to mid 1930
4-11
1997
Battery support (stamped design) lock washer
1928-1931
4-11
1997
Battery clamp/support nuts
1928 to mid 1930
4-11
1997
Bumper arm front bolts
1928-1931
4-11
1997
Bumper arm front nuts and lock washers
1928-1931
4-11
1997
Bumper arm rear bolts (to frame), nuts (changed to Black thru production)
1928 to mid 1930
4-11
1997
Bumper arm rear lock washers
1928-1931
4-11
1997
Bumper arm rear bolts (to cross member) and lock washers
1928-1931
4-11
1997
Bumper arm rear bolts (to cross member) and nuts (changed to Zinc thru production)
1928 to mid 1930
4-11
1997
Bumper arm rear bolts (to body)
1928-1931
4-11
1997
Lock washers for bumper arm, rear, to body
Mid 1930 thru 1931
4-11
1997
Clutch housing bolts and lock washers
1928-1931
4-11
1997
Clutch (housing) release shaft and pin
1928-1931
4-11
1997
Clutch housing hand hole cover screws
1928-1931
4-11
1997
Cross brace to rear bumper arm bolts and nuts (changed to Black thru production)
1928 to mid-1930
4-11
1997
Cross brace to rear bumper arm lock washers (changed to Black thru production)
1928 to early 1931
4-11
1997
Drag link plugs and cotters
1928-1931
4-11
1997
Fender bracket front cotters (early only)
Early 1928
4-11
1997
Fender brackets front, nuts (changed to Zinc thru production)
1928 to mid-1930
4-11
1997
Fender bracket front lock washers
1928-1931
4-11
1997
Flywheel housing drain hole cotter
1928-1931
4-11
1997
Flywheel housing shield lock washers
1928-1931
4-11
1997
Grease fittings, drive-in type (changed to Cad. Thru production)
1928 to mid 1930
4-11
1997
Grease fittings, threaded, (in the interest of preservation, they can be Cad. thru production)
1928-1931
4-11
1997
Radius rod front (wishbone) ball socket and ball cap
1928-1931
4-11
1997
Radius rod front bolts, nuts, cotters and sleeves
1928-1931
4-11
1997
Radius rod front retaining pin and cotter
1928-1931
4-11
1997
Radius rod rear bolt (front), nut, cotter
1928-1931
4-11
1997
Speedometer drive cap assembly lock washers
1928-1931
4-11
1997
Spindle arms nuts and cotters
1928-1931
4-11
1997
Spindle bolts (king pins) locking pin, castle nut and cotter
1928 thru Aug. 1929
4-11
1997
Spindle bolts (king pins) locking pin, stop nut, lock washer
Sept. 1929 thru 1931
4-11
1997
Spindle bolts (king pins) thrust bearing
1928-1931
4-11
1997
Spindle bolts (king pins) felt retainer
1928-1931
4-11
1997
Spindle connecting rod end bolts, nuts and cotters
1928-1931
4-11
1997
Spindle connecting rod end plugs and cotters
1928-1931
4-11
1997
Spring clip front (“U” bolt) cotters
1928-1931
4-11
1997
Spring clips front (“U” bolt) nuts
1928 to mid-1930
4-11
1997
Spring clip rear (“U” bolt) nuts and cotters
1928-1931
4-11
1997
Spring perch nuts and cotters
1928-1931
4-11
1997
Steering (column) to frame bolts and cotters
1928-1931
4-11
1997
Steering (column) to frame nuts (changed to Black thru production)
1928 to mid 1930
4-11
1997
Steering gear arm (Pitman arm) bolt and cotter
1928-1931
4-11
1997
Steering gear arm (Pitman arm) nut (changed to Black thru production)
1928 to mid 1930
4-11
1997
Transmission case shafts, shaft retainer, bolt, lock washer
1928-1931
4-11
1997
Transmission case drain and fill plugs (could also be Raven Finish)
1928-1931
4-11
1997
Transmission gear shift housing bolts and lock washers
1928-1931
4-11
1997
Universal joint housing cap outer bolts and lock washers
1928-1931
4-11
1997
Universal joint housing cap outer nuts (changed to Zinc thru production)
1928 to mid 1930
4-11
1997
Universal joint housing cap, inner
1928-1931
4-11
1997
Universal joint housing cap bolts, nuts, cotters (to transmission)
1928-1931
4-11
1997
For lubricator fittings A, B, D and E above, 4-8, cadmium plating may be used in the interest of preservation.
ZINC
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Battery support (stamped design) nut (rear)
Mid 1930 thru 1931
4-11
1997
Nuts for bumper arm, rear, to cross member
Mid 1930 thru 1931
4-11
1997
Fender brackets front nuts
Mid 1930 thru 1931
4-11
1997
Universal joint housing cap outer nuts
Mid 1930 thru 1931
4-11
1997
ZINC PLATE (S8)
DESCRIPTION
TIME PERIOD
AREA/PAGE
REVISION
Battery clamp hold down nuts
Dec. 1929 thru 1930
4-5
1997
Battery support (stamped design) nut (rear)
Mid 1930 thru 1931
4-11
1997
Battery clamp hold down nuts
?
4-11
1997
Speedometer drive cap assembly fillister head cap screw
1928
4-11
1997