Choke rod knob

1928-1931

1-10

1994

Starter push rod grommet (hard rubber)*

1928 thru August 1930

1-1

1994

Engine splash pan bolts

Mid-1930 to mid-1931

1-4

1994

3-point engine front end support 7/16-20 castle nut, 15/32 (3/32 x 1-3/16) flat washer and cotter pin

Mid 1930 to end

1-4

1994

Gasoline shut off valve Town Car only

1928-1931

1-5

1994

Gasoline shut off valve handle lock washer

Mid 1930 to end

1-5

1994

Sediment bulb (cast iron) drain plug spring

1928-April 1931

1-5

1994

Data plate rivets (also nickel)

1928-1929

1-9

1994

Accelerator assembly

1928-1931

1-10

1994

Choke rod spring

1928-1931

1-10

1994

Crankshaft nut (also raven or unfinished)

1928-1931

1-10

1994

Engine front support

1928-1931

1-10

1994

Engine front support springs (also cadmium, unfinished, or raven finish)

1928-1931

1-10

1994

Engine front support castellated nut and cotter (also unfinished)

1928-1931

1-10

1994

Engine splash pans

1928-1931

1-10

1994

Engine splash pan bolts (also raven or unfinished)

1928-1931

1-10

1994

Fuel shutoff valve, Town Car

1928-1929

1-10

1994

Hood lacing rivets

1928-1931

1-10

1994

Oil filler pipe

1928-1931

1-10

1994

Oil pan assembly (also cadmium or zinc plated)

Start to Feb. 1928

1-10

1994

Oil pan assembly

Mar. 1928-1931

1-10

1994

Oil pan clean out plate (also cadmium or zinc plate)

1928

1-10

1994

Oil return pipe

1928-1931

1-10

1994

Radiator support rods

1928-1931

1-10

1994

Radiator shell washers

1928-1931

1-10

1994

Speedometer cable clips

1928-1931

1-10

1994

Radiator shell lacing rivets

March 1928 thru production

1-1

1994

Hood pad to dash clamp screw (also cadmium or unfinished)

1928-1929

1-1

1994

Hood pad to dash clamp nut (also cadmium or unfinished)

1928-1929

1-1

1994

Hood pad to cowl panel rivets

1928-1929

1-1

1994

Rivets for metal clips at each end cowl lacing

1930-1931

1-1

1994

Flat washer to attach the radiator shell to radiator

Mid-1930 to late 1930

1-1

1994

Lock washer to attach the radiator shell to radiator

Late 1930 to 1931

1-1

1994

Oil breather caps (also plain, cadmium plated or terne finish)

1928-1931

1-3

1994

Engine oil pan (also cadmium plated)

1928-1931

1-4

1994

Gas lines on Town Car

1928-1929

1-6

1994

Choke rod spring

1928-1931

1-7

1994

Cast iron sediment bulb

1928-1931

1-6, 10

1994

Top and bottom of carburetor

1928-1931

1-6

1994

Carburetor body

1928-1931

1-10

1994

Sediment bulb (cast iron) drain plug spring

1928-April 1931

1-10

1994

Sediment bulb (cast iron) drain plug (also unfinished)

1928-April 1931

1-10

1994

Gasoline shut off valve

1928-1931

1-5

1994

Rubber grommet used with the indented firewall for gas shut off valve

1931

1-5

1994

Gasoline shut off valves (also unfinished)

1928-1931

1-5

1994

Firewall

1928-1931

1-10

1994

Fuel shut off valve (also unfinished)

1928-1931

1-10

1994

Fuel shutoff valve firewall grommet

1931

1-10

1994

Hood, underside

1928-1931

1-10

1994

Bushing for new front engine support

Nov. 1928-Feb. 1929

1-4

1994

Oil return pipe washers

June 1930-1931

1-5

1994

Cast iron sediment bulb large nut

1928-1931

1-5

1994

Nuts on gasoline tank to sediment bulb pipe assemblies (inside gas line)

May 1928-1931

1-6

1994

Throttle lever shaft (throttle levers were plated prior to assembly to the shaft)

1928-1931

1-7

1994

Carburetor idle air adjustment screw and machined cap (also nickel)

To mid 1928

1-9

1994

Carburetor idle air adjustment screw and pressed cap (also nickel)

Mid 1928 to mid 1930

1-9

1994

Carburetor idle air adjustment screw and cap (also cadmium)

Mid 1930 to end

1-9

1994

Flywheel housing shims (also copper)

1928-1931

1-9, 10

1994

Vacuum line to wiper fittings

Feb. 1929 to 1931

1-10

1994

Oil return pipe washers

June 1930 to end

1-10

1994

Cylinder head gasket (also copper clad asbestos)

1928-1931

1-3

1994

Intake to carburetor gasket (also copper clad asbestos)

1928-1931

1-7

1994

Cylinder head gasket (also copper clad asbestos

1928-1931

1-10

1994

Hood pad to dash clamp screw (also unfinished or black enamel)

1928-1929

1-1

1994

Hood pad to dash clamp nut (also unfinished or black enamel)

1928-1929

1-1

1994

Top cowl lacing binding head screws

1930-1931

1-1

1994

Nut to attach the radiator shell to radiator

Mid 1930-1931

1-1

1994

Oil breather caps (also black enamel, plain or terne finish)

1928-1931

1-3, 10

1994

Oil dip stick (also plain)

1928-1931

1-3, 10

1994

Engine oil pan (Jan. 1928 thru June 1928 in A-6, 1997) (also black enamel)

Start to Feb. 1928

1-4

1994

Gasoline shut off valve handle (if valve was unfinished)

1928-1931

1-5

1994

Cast iron filter bowl to carburetor bolt

April 1931 to end

1-5

1994

Firewall vacuum line fitting nut

1931

1-5

1994

Carburetor pins such as choke and throttle stop pins, venturi pins, port access plugs and float hangers were installed after the upper and lower bodies were painted and retained their own finishes (also black oxide or unfinished)

1928-1931

1-7

1994

Carburetor choke and throttle levers (also plain)

Early 1930 to end

1-7

1994

Carburetor main assembly bolt

1928-1931

1-7, 10

1994

Carburetor choke driver

1928-1931

1-7

1994

Choke rod (not knob) and seamed rod sleeve (also zinc plated)

1928-1931

1-7, 10

1994

Carburetor idle air adjustment screw and cap (also plain brass)

Mid 1930 to end

1-9

1994

Carburetor idle air adjustment screw and cap (steel) (also plain steel)

Late 1930 to end

1-9

1994

Spark, throttle, and carburetor linkages (also zinc plate)

1928-1931

1-9, 10

1994

Data plate rivets

1930-1931

1-9

1994

Gasoline accelerator assembly pedal (also zinc plated)

1928-1931

1-10

1994

Cylinder head nuts (also zinc plated)

1928-1931

1-10

1994

Distributor set screw and nut (also zinc plated)

1928-1931

1-10

1994

Engine front support springs (also black, unfinished, or raven)

1928-1931

1-10

1994

Fuel shutoff valve handle (also zinc plated)

1928-1931

1-10

1994

Intake manifold nuts (also zinc plated)

1928-1931

1-10

1994

Oil drain plug (also raven, unfinished or zinc)

1929-1931

1-10

1994

Oil pan assembly (also black or zinc plated)

Start to Feb. 1928

1-10

1994

Oil pan clean out plate (also black or zinc plated)

1928

1-10

1994

Oil pan clean out plate bolts

1928

1-10

1994

Radiator shell nuts (also unfinished)

1928-1931

1-10

1994

Glass sediment filter bowl wire clamp, cup, and jam nut (also zinc plated)

Mid 1929 thru early 1931

1-10, 5

1994

Gasoline sediment filter bowl (glass) wire clamp, cup, and jam nut

1929-1930

1-10

1994

Vacuum line to wiper motor nuts

Feb. 1929-1931

1-10

1994

Oil return pipe washers

1928 until June 1930

1-4, 5

1994

Timing pin washer

1928

1-5

1994

Flywheel housing shims (also brass)

1928-1931

1-9,10

1994

Oil drain plug gasket

1928-1931

1-10

1994

Timing pin washer

1928

1-10

1994

Oil return pipe washers

1928 to June 1930

1-10

1994

Cylinder head gasket (also brass clad asbestos)

1928-1931

1-3

1994

Oil return pipe gaskets

1928-mid 1929

1-4

1994

Intake to carburetor gasket (also brass clad asbestos)

1928-1931

1-7

1994

Cylinder head gasket (also brass clad asbestos)

1928-1931

1-10

1994

Gasoline shut off valve handle nut

Mid 1930 to mid 1931

1-5

1994

Engine block

1928-1931

1-2, 10

1994

Cylinder heads

1928-1931

1-2, 10

1994

Valve chamber cover

1928-1931

1-4, 10

1994

Timing gear cover

1928-1931

1-5, 10

1994

Crankshaft pulley

1928-1931

1-5, 10

1994

Machined surface around intake and exhaust ports (also unfinished)

1928-1931

1-5

1994

Intake manifold slotted plug (also unfinished)

Feb. 1929 to end

1-9

1994

Clutch housing

1928-1931

1-10

1994

Plug (above oil pump) (also unfinished)

1928-1931

1-10

1994

Flywheel housing

1928-1931

1-10

1994

Intake manifold

1928-1931

1-10

1994

Intake manifold vacuum plug (also unfinished)

1929-1931

1-10

1994

Sediment filter bulb (cast iron) screw retainer gasket

1928-1931

1-5, 10

1994

Gasoline tank to sediment bulb pipe nuts

1928-April 1928

1-6

1994

Carburetor choke and throttle levers

1928-early 1930

1-7

1994

Carburetor idle air adjustment screw and machined cap (also plain brass)

To mid 1928

1-9

1994

Carburetor idle air adjustment screw and pressed cap (also plain)

Mid 1928 to mid 1930

1-9

1994

Data plate rivets (also black)

1928-1929

1-9

1994

Bolt to attach the radiator shell to the radiator

Mid 1930-1931

1-1

1994

Engine splash pan bolts

Mid 1931 to end.

1-4

1994

Rear engine support 18-gauge safety wire (also plain)

1928-1931

1-4

1994

Rear engine support reinforcing plate to frame bolts, castled nuts (and cotter pins)

Mid 1930 to end

1-4

1994

Timing pin

(Cadmium plated Oct. 1927 thru Dec. 1927, A-2, 1997)

1928-1931

1-5, 10

1994

Timing gear cover bolts and lock washers

Mid 1930 to end

1-5, 10

1994

Carburetor pins such as choke and throttle stop pins, venturi pins, port access plugs and float hangers were installed after the upper and lower bodies were painted and retained their own finishes (also cadmium or unfinished)

1928-1931

1-7

1994

Choke rod No. 12 cup finish washer

1928-1931

1-9, 10

1994

Speedometer cable housing

1928-1931

1-9

1994

Carburetor main bolt lock washer (also unfinished)

1928-1931

1-10

1994

Crankshaft nut (also black or unfinished)

1928-1931

1-10

1994

Cylinder head studs (also unfinished)

1928-1931

1-10

1994

Engine front support springs (also black, cadmium or unfinished)

1928-1931

1-10

1994

Engine splash pan bolts (also black or unfinished)

1928-1931

1-10

1994

Intake manifold studs and washers (also unfinished)

1928-1931

1-10

1994

Oil drain plug (also cadmium, unfinished or zinc)

1929-1931

1-10

1994

Radiator support rod nuts and washers

1928-1931

1-10

1994

Radiator shell bolts (also unfinished)

1928-1931

1-10

1994

Speedometer cable housing

1928-1931

1-10

1994

Speedometer cable clip bolts and lock washers

1928-1931

1-10

1994

Oil breather caps (also black enamel, cadmium plated or plain)

1928-1931

1-3, 10

1994

Gasoline lines

1928-1931

1-6

1994

Vacuum line to wiper motor

Feb. 1929-1931

1-6, 10

1994

Fuel line

1928-1931

1-10

1994

Hood pad to dash clamp screw (also cadmium or black enamel)

1928-1929

1-1

1994

Hood pad to dash clamp nut (also cadmium or black enamel)

1928-1929

1-1

1994

Bolts and nuts to attach the radiator shell to radiator

1928-mid 1930

1-1, 10

1994

Bolts, nuts and cotter pins for front and center “engine” main bearings

1928-1931

1-3

1994

Oil breather caps (also black enamel, cadmium plated or terne finish)

1928-1931

1-3, 10

1994

Oil dip stick (also cadmium plated)

1928-1931

1-3, 10

1994

Engine splash pan bolts

1928-mid 1930

1-4, 10

1994

Engine splash pan cotter pins

1928 to mid 1929

1-4, 10

1994

Engine splash pan lock washer

Mid 1929 to end

1-4, 10

1994

Engine splash pan square nut

1928-1931

1-4, 10

1994

3-point engine front end support 7/16-20 castle nut and cotter pin

1928 to Feb. 1929

1-4

1994

3-point engine front end support 9/16 (3/32 x 1-3/16) flat washer, 9/16-18 castle nut and cotter pin

Feb. 1929 to August 1929

1-4

1994

3-point engine front end support 7/16-20 castle nut, 15/32 (3/32 x 1-3/16) flat washer and cotter pin

August 1929 to mid 1930

1-4

1994

Rear engine support 18-gauge safety wire (also raven finish)

1928-1931

1-4

1994

Rear engine support reinforcing plate to frame bolts, castled nuts (and cotter pins)

1928-mid 1930

1-4

1994

Oil return pipe bolts

1928-1931

1-4, 10

1994

Valve cover bolts and lock washers

1928-1931

1-5, 10

1994

Timing gear cover lock washers

1928-1931

1-5, 10

1994

Timing gear cover bolts

1928 to mid 1930

1-5, 10

1994

Engine gaskets

1928-1931

1-5, 10

1994

Machined surface around intake and exhaust ports (also Ford Engine Green)

1928-1931

1-5

1994

Gasoline shut off valve (also body color)

1928-1931

1-5

1994

Gasoline shut off valve handle nut

1928 to mid 1930

1-5

1994

Gasoline shut off valve handle lock washer

1928-mid 1930

1-5

1994

Gasoline tank to sediment bulb pipe nuts

May 1928 to end

1-6

1994

Firewall vacuum line fitting nut

1928-1930

1-6

1994

Carburetor pins such as choke and throttle stop pins, venturi pins, port access plugs and float hangers were installed after the upper and lower bodies were painted and retained their own finishes (also black oxide or cadmium)

1928-1931

1-7

1994

Carburetor choke and throttle levers (also cadmium)

Early 1930 to end

1-7

1994

Carburetor idle air adjustment screw and cap (steel) (also cadmium)

Late 1930 to end

1-9

1994

Intake manifold slotted plug (also Ford Engine Green)

Feb. 1929 to end

1-9

1994

Carburetor mounting bolts and lock washers

1928-1931

1-10

1994

Carburetor main bolt lock washer (also raven finish)

1928-1931

1-10

1994

Choke rod leather washer

1928-1931

1-10

1994

Crankshaft nut (also raven or black finish)

1928-1931

1-10

1994

Cylinder head studs (also raven finish)

1928-1931

1-10

1994

Plug (above oil pump) (also Ford Engine Green)

1928-1931

1-10

1994

Engine front support bolts and lock washers

1928-1931

1-10

1994

Engine front support springs (also black, cadmium or unfinished)

1928-1931

1-10

1994

Engine front support bushing or washer

1928-1931

1-10

1994

Engine front support leather washer

1928-1931

1-10

1994

Engine front support castellated nut and cotter (also black)

1928-1931

1-10

1994

Engine splash pan bolts (also raven or black)

1928-1931

1-10

1994

Engine splash pan nuts, cotters, and lock washers

1928-1931

1-10

Flywheel housing shims (copper or brass)

1928-1931

1-10

1994

Fuel line fittings

1928-1931

1-10

1994

Fuel shut off valve (also lower body color)

1928-1931

1-10

1994

Oil pan assembly gasket (cork)

1928-1931

1-10

1994

Timing gear cover and valve chamber cover gasket (manila tag paper)

1928-1931

1-10

1994

Intake manifold vacuum plug (also Ford Engine Green)

1929-1931

1-10

1994

Intake manifold studs and washers (also raven finish)

1928-1931

1-10

1994

Intake manifold bolts and lock washers between manifolds

1928-1931

1-10

1994

Engine main bearing bolts, castellated nuts and cotters

1928-1931

1-10

1994

Oil dip stick (also cadmium)

1928-1931

1-10

1994

Oil drain plug

1928

1-10

1994

Oil drain plug (also raven, cadmium or zinc)

1929-1931

1-10

1994

Engine oil pan assembly bolts and lock washers

1928-1931

1-10

1994

Oil pan cleanout plate lock washers

1928

1-10

1994

Radiator shell bolts (also raven finish )

1928-1931

1-10

1994

Radiator shell nuts (also cadmium)

1928-1931

1-10

1994

Sediment bulb (cast iron) drain plug (also dull black paint)

1928-April 1931

1-10

1994

Vacuum line to wiper motor nuts

Feb. 1929-1931

1-10

1994

Gasoline shut off valve handle nut

Mid 1931 to end

1-5

1994

Spark, throttle, and carburetor linkages (also cadmium plated)

1928-1931

1-10

1994

Accelerator pedal (also cadmium plated)

1928-1931

1-10

1994

Choke rod (not knob) and seamed rod sleeve (also cadmium plated)

1928-1931

1-10

1994

Cylinder head nuts (also cadmium plated)

1928-1931

1-10

1994

Distributor set screw and nut (also cadmium)

1928-1931

1-10

1994

Gasoline shut off valve handle (if valve was unfinished) (also cadmium plate)

1928-1931

1-10

1994

Intake manifold nuts (also cadmium)

1928-1931

1-10

1994

Oil drain plug (also raven, unfinished or cadmium)

1929-1931

1-10

1994

Oil pan assembly (also cadmium or black)

Start to Feb. 1928

1-10

1994

Oil pan clean out plate (also cadmium or black)

1928

1-10

1994

Glass sediment filter bowl wire clamp, cup, and jam nut (also cadmium)

Mid 1929 thru early 1931

1-10, 5

1994

Leather washer used with engine front support

Nov. 1928-1931

1-4

1994

Oil return pipe gaskets (white or black compressed asbestos)

Mid 1929-1931

1-4

1994

Fiber washers (tan or reddish brown) for gasoline cast iron filter bowl on indented firewalls

April 1931

1-5

1994

Leather washer for choke rod assembly against firewall and counter sunk finish washer

1928-1931

1-9

1994